Copyright Notice: No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. Disclaimer: Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ASRock Website: http://www.asrock.com Published February 2006 Copyright©2006 ASRock INC. All rights reserved. 1 ASRock 775XFire-RAID Motherboard English Layout Motherboard Layout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PS2_USB_PWR1 Jumper ATX 12V Connector (ATX12V1) ATX Power Connector (ATXPWR1) 775-Pin CPU Socket North Bridge Controller CPU Fan Connector (CPU_FAN1) 2 x 240-pin DDRII DIMM Slots (Dual Channel A: DDRII_1, DDRII_3; Yellow) 2 x 240-pin DDRII DIMM Slots (Dual Channel B: DDRII_2, DDRII_4; Orange) IDE1 Connector (IDE1, Blue) Clear CMOS Jumper (CLRCMOS1) South Bridge Controller Serial ATA Connector 2 (SATA_2, black) Serial ATA Connector 3 (SATA_3, black) Serial ATA Connector 1 (SATA_1, blue) Serial ATA Connector 0 (SATA_0, blue) 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Chassis Fan Connector (CHA_FAN1) System Panel Header (PANEL1) Chassis Speaker Header (SPEAKER 1) Infrared Module Connector (IR1) USB 2.0 Header (USB67, Blue) USB 2.0 Header (USB45, Blue) Floppy Connector (FLOPPY1) Game Port Header (GAME1) Front Panel Audio Header (HD_AUDIO1) PCI Slots (PCI1- 3) BIOS FWH Chip AGI Express Slot (PCI Express x 4) PCIEX1_EN1 - 5 PCI Express x 1 Slot (PCIE2) PCI Express x 16 Slot (PCIE1) SLI / XFIRE Power Connector Internal Audio Connector: CD1 (Black) English 2 ASRock 775XFire-RAID Motherboard HD 8CH I/O 1 2 3 4 5 6 Parallel Port RJ-45 Port Side Speaker (Gray) Rear Speaker (Black) Central / Bass (Orange) Line In (Light Blue) Front Speaker (Lime) 8 9 10 11 12 13 Microphone (Pink) USB 2.0 Ports (USB01) USB 2.0 Ports (USB23) Serial Port: COM1 PS/2 Keyboard Port (Purple) PS/2 Mouse Port (Green) *7 * If you use 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker (No. 7) (No. 4) 2 V -4 V V 6 V V 8 V V Central / Bass (No. 5) --V V Side Speaker (No. 3) ---V * If you use 8-channel audio and enable Multi-Streaming function, "Side Speaker" will be disabled . Therefore, only 6-channel audio function will work but not 8-channel audio. To enable MultiStreaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find "Mixer" tool on your system. Please select "Mixer ToolBox" , click "Enable playback multi-streaming", and click "ok". Choose "2CH", "4CH", or "6CH", and then you are allowed to select "Realtek HDA Primary output" to use Rear Speaker, Central/Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use front panel audio to share Side Speaker. 3 ASRock 775XFire-RAID Motherboard English 1. Introduction Thank you for purchasing ASRock 775XFire-RAID motherboard, a reliable motherboard produced under ASRock's consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock's commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com 1.1 Package Contents ASRock 775XFire-RAID Motherboard (ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm) ASRock 775XFire-RAID Quick Installation Guide ASRock 775XFire-RAID Support CD (including LGA 775 CPU Installation Live Demo) One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable One Ribbon Cable for a 3.5-in Floppy Drive One Serial ATA (SATA) Data Cable (Optional) One Serial ATA (SATA) HDD Power Cable (Optional) One HD 8CH I/O Panel Shield English English English English English 4 ASRock 775XFire-RAID Motherboard 1.2 Specifications - ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm - LGA 775 for Intel® Pentium® 4 / Celeron® D, supporting Cedar Mill processors (in 775-land LGA package) - FSB 800/533 MHz - Supports Hyper-Threading Technology (see CAUTION 1) - Supports EM64T CPU - Northbridge: Intel® 925X chipset - Southbridge: Intel® ICH6R - Dual Channel DDRII Memory Technology (see CAUTION 2) - 4 x DDRII DIMM slots - Support DDRII533 - Max. capacity: 4GB - CPU Frequency Stepless Control (see CAUTION 3) - ASRock U-COP (see CAUTION 4) - Boot Failure Guard (B.F.G.) - Supports ATI® CrossFireTM - 3 x PCI slots - 1 x PCI Express x 16 slot - 1 x AGI Express slot (PCI Express x 4) (see CAUTION 5) - 1 x PCI Express x 1 slot - Realtek ALC861 7.1 channel CODEC with High Definition Audio - Realtek PCI LAN 8101L - Speed: 10/100 Ethernet - Supports Wake-On-LAN HD 8CH I/O - 1 x PS/2 Mouse Port - 1 x PS/2 Keyboard Port - 1 x Serial Port: COM1 - 1 x Parallel Port (ECP/EPP Support) - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 Port - Audio Jack: Side Speaker/Rear Speaker/Central Bass/Line in/Front Speaker/Microphone (see CAUTION 6) Platform CPU Chipset Memory Hybrid Booster Expansion Slot Audio LAN Rear Panel I/O 5 ASRock 775XFire-RAID Motherboard English Connector BIOS Feature Support CD Hardware Monitor OS Certifications - 4 x Serial ATA 1.5Gb/s connectors, support RAID (RAID 0, RAID 1, and Intel Matrix Storage) and "Hot Plug" functions - 1 x ATA100 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - 1 x IR header - 1 x Game header - CPU/Chassis FAN connector - 20 pin ATX power connector - 4 pin 12V power connector - SLI/XFIRE power connector - CD in header - Front panel audio connector - 2 x USB 2.0 headers (support 4 USB 2.0 ports) (see CAUTION 7) - 4Mb AMI BIOS - AMI Legal BIOS - Supports "Plug and Play" - ACPI 1.1 Compliance Wake Up Events - Supports jumperfree - Drivers, Utilities, AntiVirus Software - CPU Temperature Sensing - Chassis Temperature Sensing - CPU Overheat Shutdown to Protect CPU Life - CPU Fan Tachometer - Chassis Fan Tachometer - CPU Quiet Fan - Voltage Monitoring: +12V, +5V, +3.3V, Vcore - Microsoft® Windows® 2000/XP/XP 64-bit compliant - FCC, CE, WHQL English 6 ASRock 775XFire-RAID Motherboard CAUTION! 1. 2. About the setting of "Hyper Threading Technology", please check page 36 of "User Manual" in the Support CD. This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 12 for proper installation. Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU. While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. If you install PCI Express VGA card to AGI Express slot (PCI Express x 4), PCIE2 slot (PCIE x 1) function will be disabled. For the information of the compatible PCI Express VGA cards, please refer to the "Supported PCI Express VGA Card List for AGI Express Slot (PCI Express x 4)" on page 8. For the proper installation of PCI Express VGA card, please refer to the installation guide on page 14. For microphone input, this motherboard supports both stereo and mono modes. For audio output, this motherboard supports 2-channel, 4-channel, 6-channel, and 8-channel modes. Please check the table on page 3 for proper connection. Power Management for USB 2.0 works fine under Microsoft® Windows® XP SP1 or SP2 / 2000 SP4. 3. 4. 5. 6. 7. 7 ASRock 775XFire-RAID Motherboard English 1.3 Supported PCI Express VGA Card List for AGI Express Slot (PCI Express x 4) (for Windows 2000/Windows XP) Graphics Chip Vendor NVIDIA Model Name ASUS Extreme N6200GE/TD ASUS Extreme N6200TC256/TD ASUS Extreme N6800/TD ASUS Extreme N6800GT ALBATRON PC6600GT GIGABYTE GV-NX66128D Inno3D GeFORCE 6600 LE LEADTEK PX6200 TC/TDH MSI PCX 5750-TD128E SPARKLE GeFORCE 6200TC ASUS Extreme AX600XT/HTVD ASUS Extreme AX700PRO/TVD GECUBE Radeon X850XT 256M MSI RX1300GPRO-TD256E Chipset Name GeForce 6200 GeForce 6200 GeForce 6800 GeForce 6800GT GeForce 6600GT GeForce 6600 GeForce 6600LE GeForce 6200TC GeForce PCX5750 GeForce 6200TC RADEON X600XT RADEON X700PRO RADEON X850XT RADEON X1300 PRO ATI For the latest updates of the supported PCI Express VGA card list for AGI Express slot (PCI Express x 4), please visit our website for details. ASRock website: http://www.asrock.com/support/index.htm Note. It is not recommended to use Turbo cache PCI Express x 16 VGA cards. English 8 ASRock 775XFire-RAID Motherboard 2. Installation Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3. Hold components by the edges and do not touch the ICs. 4. Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. 5. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. 2.1 CPU Installation For the installation of Intel 775-LAND CPU, please follow the steps below. 775-Pin Socket Overview Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. 9 ASRock 775XFire-RAID Motherboard English Step 1. Open the socket: Step 1-1. Disengaging the lever by depressing down and out on the hook to clear retention tab. Step 1-2. Rotate the load lever to fully open position at approximately 135 degrees. Step 1-3. Rotate the load plate to fully open position at approximately 100 degrees. Step 2. Insert the 775-LAND CPU: Step 2-1. Hold the CPU by the edges where are marked with black lines. black line black line Step 2-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. Pin1 orientation key notch orientation key notch Pin1 alignment key alignment key 775-Pin Socket 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into ...